Our Boyne Collection is a beautiful collection of engineered oak floors. Boyne White Oiled Oak is a 20mm floor with a 4mm solid layer meaning it can last a lifetime. Its Natural colouring means it will be suited for the any room or interior while the white oiled finish gives you the most natural feel possible. Because the boards are 1900mm long and 190mm wide, they will give you a stunning look of continuity. Boyne White Oiled Oak is a floor that really gives you that little bit extra.
What is an Engineered Floor ?
An engineered floor has taken all the benefits of both the old solid and semi solid floors and perfectly blended them into one. What you look at and walk on is solid timber so you get that feel and look you can only associate with real wood. The real wood is then pressed onto a plywood base which gives your floor the stability that is missing from a real wood floor. Because of this process your floor will not move as much as with solid timber. All engineered flooring is suitable for underfloor heating.
Cleaning and Maintenance:
The cleaning and maintenance of our engineered flooring is similar to all wood flooring. A sweep of a brush is all it should take to remove light dirt from your floor. For mopping, it is important you use a damp mop rather than a wet mop. If your floor is too wet, over time it may cause issues from water penetrating the joints. Our Clean Green Cleaner is what we recommend for use on all our engineered flooring along with our Dada Spin Mop (both of which are available by clicking the relevant links)
4mm Top Layer
Suitable for underfloor heating
Installation method: glue down/nail down/ floating